Shop

SAVER ONE D
1 August 2019
GEO SAVER FULLY AUTOMATIC
1 August 2019
Show all

SAVER ONE P

Category:
The handy PRO AED

AED with ECG Monitoring and MANUAL Override functions for advanced life support!
Saver One P allows a great versatility for any scenario!

Tough, small and lightweight Defibrillator easy to carry and use anywhere, able to act as an AED or a Manual Defibrillator or a Basic Cardiac Monitoring device.

HIGHLY FLEXIBLE AND VERSATILE WITH ADVANCED CAPABILITIES
AED per default, reliable for any BLS rescuer, can be easily switched in a Manual Defibrillator giving to ALS responders the best decision-making control for a manual shock timing or an electric cardioversion (synchronised shock).
Equipped with a new widely manageable software program which gives users the total control of device to suit their needs.
Advanced PBLS feature enabling healthcare providers to use the 15:2 CV ratio when performing a Pediatric Basic Life Support, as required by Guidelines if more than one rescuer with a duty to respond.

5.7” TFT Colour Display
most detailed and comprehensive screen provides valuable information to rescuers:

ABOUT DEVICE:
a battery gauge with residual capacity
the indicator of available memory for recording
a notice if the microphone is active or OFF
the local date and time, alarms.

ABOUT RESCUE:
the adult or child protocol in use
the modality in use (AED, ECG or Manual)
the fibrillation and shock counts
the elapsed rescue time
the heart rate (bpm)
the impedance (ohms)
the energy level to be delivered (joule)
a touch/not touch pictogram
ECG waveform
the R wave detection in Manual Synchronous
a charging bar graph if device charges
a CPR bar graph and cycles countdown

MODEL NUMBERS
Code SVP-B0006: Standard Version maximum energy at 200J
Code SVP-B0007: Power Version with maximum energy at 360J
CONFIGURATION OPTIONS (BOX CONTENT)
Conf-Norm: Standard Basic Configuration (adult pads, disposable battery, carrying case)
Conf-Rech: Rechargeable Configuration (adult pads, accumulator, charger station, carrying case)
Conf-Print: Print Ready Configuration (adult pads, disposable battery, carrying case, IrDa port and thermal printer)
Conf-Rech/Print: Rechargeable & Print Ready Configuration (adult pads, accumulator, charger station, carrying case, IrDA port and thermal printer)

 

 

 

Technical specifications

AED per default, reliable for any BLS rescuer, can be easily switched in a Manual Defibrillator giving to ALS responders the best decision-making control for a manual shock timing or an electric cardioversion (synchronised shock).

DEFIBRILLATOR
Operation: AED Semi-Automatic (default)
ECG Monitoring
Manual Asynchronous or Synchronous (used to convert atrial or ventricular tachyarrhythmias)
Energies: Standard max 200J or Power max 360J
Waveform: Adaptive BTE (biphasic truncated exponential) conforming to patient chest’s impedance
Energy Type: Escalating from 50 to 360J
AED Protocols: Adult Standard escalating 150, 200, 200J
Adult Power escalating 200, 250, 360J
Pediatric (Standard or Power) 50J fixed
(AED adult shock protocols can be customized)
Manual Protocol: Selected by users from 50 to 360J.
For electric cardioversion (in Synchronous mode) the shock is synchronised to occur with the R wave of the ECG
Energy Display: Screen provides the energy to deliver both in Manual mode or AED mode
Charging time: ≤9 seconds with a new and fully charged battery
depleted battery will result in a longer charging time
Analysis time: IEC/EN 60601-2-4 from 4 to 15 seconds
Impedance: 20-200 ohms
Sensitivity: IEC/EN 60601-2-4 (AHADB, MITDB source), 97%
Specificity: IEC/EN 60601-2-4 (AHADB, MITDB source), 99%
Controls: 2 buttons: ON/OFF, shock button, and 3 buttons to surf the menu.
3 buttons: select energy, charge, disarm the device
Indicators: Status LED indicator informing on device condition
Battery gauge with remaining capacity rate
Audible alerts and text display with service alarms
Upgradeable: through a USB cable or memory card
ECG MONITORING
Operations: Through defibrillation pads or standard ECG electrodes attached to a separate 2-Lead patient monitoring reusable cable SAV-C0017
ECG size: Manual setting through the menu
Heart Rate: 30-200 bpm
Sweep Speed: 25 mm/sec
Standards: IEC/EN 60601-2-27 less then the points 202.6.2.101; 201.12.1.101.12,13; 208.6.6.2.101 not performed for the intended use of the device, as it is not intended for environments such as operating theatres or intensive care units
Display: 5,7” TFT colour, 640 x 480 pixel
BATTERY OPTIONS
Type: Li-SOCl2 Disposable, code SAV-C1032
Autonomy: 250 complete rescue cycles (shocks at 200J and CPR) or 160 complete rescue cycles (shocks at 360J and CPR) or 24 hours ECG monitoring for a new and fully charged battery (*)
Shelf-Life: when stored in original packaging 5 years (*)
Battery-Life: 4 years once installed to AED, assuming one battery insertion test and daily self-test but without switching AED on (*)
Type: Li-ion Accumulator, Code SAV-C1033
Recharging time: 2,5 hours with the charger station Code SAV-C0014 (*)
(recommended to charge every 4 months at least)
Autonomy: 200 shocks at 200J or 110 shocks at 360J or 14 hours in ECG Monitoring for a new fully charged accumulator (*)
Battery-Life: 2 years or 300 charging cycles (*)
PADS OPTIONS
Type: Disposable, pre-gelled and self-adhesive
Adult: Code SAV-C0846, for patient >8 years or >25 kg
Pediatric: Code SAV-C0016, for patient <8 years or <25 kg
Cable length: 120 cm
Shelf-Life: 30 months
EVENT RECORDING
Internal memory: up to 6 continuous hours of ECG and rescue events
Optional memory: Removable SD card; length of storage depends on card capacity: a 2GB card records up to 100 hours
Data recording: “AED1LOG“ text file with detailed self-test activity
“AEDFILES“ with complete recorded information
Event review: “Saver View Express“ data manager software
PHYSICAL
Size: 26,5 x 21,5 x 7,5 cm
Weight: 2,08 kg with disposable battery
2,13 kg with rechargeable battery
ENVIROMENTAL
Operating temperature: 0°C to 55°C (32°F TO 131°F)
Storing/Shipping temperature: -40°C to 70°C (-40°F TO 158°F) without battery
Humidity: 10% to 95% relative humidity non condensing
Sealing (IP Protection): IEC/EN 60529 class IP54; splash proof, dust protected
Shock/Drop Abuse Endurance: IEC/EN 60601-1 clause 21; 1 meter drop, impact, force, rough handling, mobile tolerance
Electrostatic Discharge: IEC/EN 61000-4-2
Electromagnetic Compatibility: IEC/EN 60601-1-2 Emission, Immunity
Electrical Protection: IEC/EN 60601-1; Internally Powered, Type BF/CF
Directive 93/42/CEE and 2007/47/CE: Class IIb
(*)Temperature at 20°C Humidity 45% non-condensing

Saver One P - Technical Data Sheet

Download